摘要传统台灯多依赖手动开关与固定亮度调节存在照明按需匹配不足、节能性欠佳及操作便捷性有限等问题难以满足现代生活中智能化、个性化的照明需求。基于 STM32F103C8T6 单片机的智能台灯测控系统整合了 D203S 人体红外传感器、5516 光照检测模块、红外避障模块、DS1302 时钟模块、按键、OLED 显示屏、ECB02 蓝牙模块及执行设备台灯光源、蜂鸣器实现了台灯的自动化感知与智能调控。系统核心功能包括通过 D203S 实时检测周围是否有人作为台灯开关的基础判断依据借助 5516 检测光照强度当光照值大于设置最大值时台灯熄灭光照值小于最大值且有人时台灯低亮度光照值低于最小值且有人时台灯高亮度利用红外避障模块检测人是否靠近检测到靠近时台灯转为微光通过 DS1302 获取时间支持按键修正时间可设置开灯计时到达计时时间蜂鸣器提醒 2 秒支持通过按键设置光照最大最小值、切换自动控制灯亮度模式及手动调节通过 OLED 显示屏实时显示各项检测数据、时间及设备状态利用蓝牙模块将数据同步至手机端实现远程监测与亮度调节、模式切换。该系统有效提升了台灯使用的智能化与便捷性实现了照明的按需调控兼顾节能与使用舒适度为智能照明设备的研发提供了参考具有较高的实际应用价值。关键词STM32F103C8T6智能台灯测控系统传感器智能调控蓝牙通信ABSTRACTTraditional table lamps mostly rely on manual switches and fixed brightness adjustment, which have problems such as insufficient on-demand matching of lighting, poor energy efficiency, and limited operational convenience, making it difficult to meet the intelligent and personalized lighting needs in modern life.The intelligent table lamp measurement and control system based on the STM32F103C8T6 microcontroller integrates the D203S human infrared sensor, 5516 light detection module, infrared obstacle avoidance module, DS1302 clock module, buttons, OLED display, ECB02 Bluetooth module, and executive devices (table lamp light source, buzzer), realizing automatic sensing and intelligent control of the table lamp. The core functions of the system include: real-time detection of whether there is a person around through D203S, which serves as the basic judgment basis for the table lamp switch; detection of light intensity with 5516, when the light value is greater than the set maximum value, the table lamp turns off; when the light value is less than the maximum value and there is a person, the table lamp is at low brightness; when the light value is lower than the minimum value and there is a person, the table lamp is at high brightness; using the infrared obstacle avoidance module to detect whether a person is approaching, and when a person is detected approaching, the table lamp turns to dim light; obtaining time through DS1302, supporting time correction through buttons, setting the lamp-on timing, and the buzzer will remind for 2 seconds when the timing time is reached; supporting the setting of maximum and minimum light values, switching the automatic control of lamp brightness mode and manual adjustment through buttons; real-time display of various detection data, time and equipment status through the OLED display; using the Bluetooth module to synchronize data to the mobile phone, realizing remote monitoring and equipment control (brightness adjustment, mode switching).This system effectively improves the intelligence and convenience of table lamp use, realizes on-demand control of lighting, takes into account energy saving and use comfort, provides a reference for the research and development of intelligent lighting equipment, and has high practical application value.Keywords:STM32F103C8T6; intelligent table lamp; measurement and control system; sensor; intelligent control; Bluetooth communication目录第1章 绪论1.1 研究的目的及意义1.2 国内外发展情况1.3 本文主要研究内容第2章 设计思路与方案论证2.1 主要元器件选择2.1.1 主控芯片选择2.1.2 人体红外传感器选择2.1.3 光照检测模块选择2.1.4 红外避障模块选择2.1.5 时钟模块选择2.1.6 显示模块选择2.1.7 蓝牙模块选择2.2整体设计方案第 3 章 硬件设计3.1 主控电路模块3.2 人体红外传感器电路3.3 光照检测模块电路3.4 红外避障传感器电路3.5 时钟模块电路3.6 显示模块电路3.7 蓝牙模块电路3.8 按键模块电路3.9 执行设备驱动电路第4章 系统程序设计4.1 编程软件介绍4.2 系统主流程设计4.3 独立按键4.4 OLED显示流程设计4.5 LED灯亮度调节子流程设计4.6 时钟模块子流程设计4.7 蓝牙模块子流程第 5 章 实物测试5.1 整体实物测试5.2 人体红外传感器功能测试5.3 光照检测与亮度调节功能测试5.4 红外避障与靠近感应功能测试5.5 时钟与定时提醒功能测试5.6 蓝牙模块功能测试5.7 按键设置与显示功能测试5.8 综合模式运行测试第6章 总结与展望致谢参考文献附录附录一原理图附录二PCB附录三主程序